Siemens SINUMERIK 840D sl Operating Manual page 206

Tool management
8.6 Tool wear
Icons in the wear list
Icon/
Marking
Tool type
Red "X"
Yellow triangle pointing
downward
Yellow triangle pointing
upward
Green border
Magazine/location number
Green double arrow
Gray double arrow
(configurable)
Red "X"
Procedure
See also
Changing a tool type (Page 219)
206
Meaning
The tool is disabled.
The prewarning limit has been reached.
The tool is in a special state.
Place the cursor on the marked tool. A tooltip provides a
short description.
The tool is preselected.
The magazine location is positioned at the change position.
The magazine location is positioned at the loading position.
The magazine location is disabled.
1. Select the "Parameter" operating area.
2. Press the "Tool wear" softkey.
Operating Manual, 03/2013, 6FC5398-6AP40-3BA1
Universal