Saving The Welding Parameters - Bosch PST 6101.321 Technical Information

Commissioning
9.10

Saving the Welding Parameters

9-10
PST 6101.321 / PSI 6101.321
When commissioning has been completed, you should backup your programs with the
Upload (Backup) function.
Create Upload (Backup):
D
Select Operation - Services - Upload (Backup).
NOTE
Existing Upload (Backup) files will be replaced. You may enter a new file name for the new
Upload (Backup) file using the File Reference function.
When the Upload (Backup) has been completed, we recommend using the Compare
function in order to check whether the saved Welding Parameters and Basic-Setup are
identical with the timer values.
Performing Compare:
D
Select Operation - Services - Compare: File -> Timer.
NOTE
When using the Compare function, you should always make sure that you selected the
proper timer and restore data.
1070 080 056-101 (99.09) GB