Table of Contents
Advertisement
Automationstechnik
Typographic conventions
Proper use
!
1070 080 056-101 (99.09) GB
Safety instructions and reader's information
General listing
Action
Screen displays,
messages, displays
(Welding) parameters
Interface signals, keys,
command fields.
Inputs: Values, texts
NOTE
Note concerning this manual: Black bars in the margin of a page indicate modifications
compared to the previous edition.
The present manual contains information on the proper use of the weld timer types PSI
6101.321 / PST 6101.321.
In connection with the specified welding equipment, the weld timers type PSI 6101.321 /
PST 6101.321
-
serve for resistance welding of metals
-
are suitable for operation in industrial environments in accordance with
DIN EN 50082-2 and 50081-2 concerning electromagnetic compatibility
(EMC).
The timers are not intended for any other use!
CAUTION!
The use for purposes other than the intended use may result in personal damage to the
user or third persons or damage to the equipment, the workpiece to be welded or environ-
mental hazards.
Therefore, our products should only be used for their intended purpose!
-
Example:
Example:
D
Italics
Example:
[in brackets]
Example:
<key>
Example:
CAPITAL LETTERS
-
The message is
displayed on the
screen.
Insert floppy
D
Read value
D
Battery-Low
Tip dress request
[Weld time],
[Schedule].
Press <F8>
VII
Advertisement
Table of Contents
