Camera Definition; Camera Seat Assignment - Bosch DCN Manual

External Interface Manual
where:
DCN CAMERA x.0
number of audience
monitors
movement time
screen line usage
camera override
number of camera
definitions
number of seat
assignments
<SEP>
<EOL>
9.3.2.2.

Camera definition

This line is repeated 'number of camera definitions' times:
camera number<SEP>prepositions<SEP>title<EOL>
where:
camera number
prepositions
title
9.3.2.3.

Camera seat assignment

This line is repeated 'number of seat assignments' times:
seat number<SEP>unit ID<SEP>camera<SEP>preposition<SEP> seattext1<SEP>seattext2<EOL>
where:
seat number
unit ID
camera
preposition
seattext1
seattext2
Bosch Security Systems B.V. | 2004 April | External Interface Manual
Indicates the type of file and the version of DCN that produced
it. In this file type indication, the letter 'x' represents the major
version number of the DCN software (Version 8.0 shown in the
line above).
Indicates how many audience monitors are present. A number
in the range 1-4 (default = 1).
Time in seconds to switch to overview camera when a camera
is changing position. A fractional number in the range 0-60 in
steps of .5.
A number defining how the screen lines are displayed. The
number can have the following values:
0 Use the first 16 characters from the screenline (namesfile)
as bottom text.
1 Use seattext 1 (see section 9.3.2.3) as bottom text.
2 Use the first 16 characters from the screenline as top text
and the next 16 character as bottom text.
3 Use seattext 1 as top title and seattext 2 as bottom text
(see section 9.3.2.3).
Defines the camera override mode:
0 The camera will stay at the currently speaking delegate or
chairman, until the speakers' microphone is switched off,
even if new speakers switch on their microphones.
1 The camera will switch to a new speaker as soon as the
speakers' microphone is switched on.
The number of camera definitions in this file.
The number of seat assignments in this file.
Indicates a separator character.
Indicates an end of line (carriage return (0x0D) and newline
character(0x0A)).
Camera number. A decimal number in the range 0 - 255
The number of prepositions the camera supports (default =
99, -1 for a fixed camera).
Camera Title. A string of at most 16 characters.
The seat number of the delegate.
The ID of the unit where seat number belongs to.
Camera number. A decimal number in the range 0 - 255
Preposition number to be programmed. A decimal number in
the range 0 - 255.
Text to display on the monitor. String of at most 16 characters.
Text to display on the monitor. String of at most 16 characters.
en | 40