Mon-Ovl-Enable; Mon-Cam; Prepos-Set - Bosch DCN Manual

External Interface Manual
text
mon#
This command overrules the text displayed on the bottom line, where normally the monitor text is located.
DCN uses this command to show the name of the delegate currently speaking and visible on the monitor.
9.2.3

MON-OVL-ENABLE

Enable/Disable monitor overlay information on monitor (mon#).
Command Syntax
MON-OVL-ENABLE mon# data1 data2
where:
mon#
data1
data2
This command enables/disables overlay information on monitor.
9.2.4

MON-CAM

Switch camera (cam#) to monitor (mon#) and update keyboard (kyb#).
Command Syntax
MON-CAM mon# kyb# cam#
where:
mon#
kyb#
cam#
This command switches the camera view to monitor and updates the keyboard.
9.2.5 MON+CAM
Switch physical camera (cam#) to monitor (mon#).
Command Syntax
MON+CAM mon# cam#
where:
mon#
cam#
This command switches the physical camera to a monitor.
9.2.6

PREPOS-SET

Set pre-position (pp#) for camera (cam#).
Command Syntax
PREPOS-SET cam# pp#
where:
cam#
pp#
Note that this command should connect the current camera position of the camera to the selected pre-
position number.
Bosch Security Systems B.V. | 2004 April | External Interface Manual
Text to display on the monitor. String of at most 16 characters. This text
will be converted to the Allegiant character set, see 9.2.8 Text conversion
DCNCC.INI
Monitor number. A decimal number in the range 0 - 255.
Monitor number. A decimal number in the range 0 - 255.
Determines if camera number, titles and status information will be
displayed (0 = do not display, 1 = display).
Value determines if time and date information will be displayed (0 = do
not display, 1 = display).
Monitor number. A decimal number in the range 0 - 255.
Keyboard number. A decimal number in the range 0 - 4. 1 is used for the
DACC.
Camera number. A decimal number in the range 0 - 255
Monitor number. A decimal number in the range 0 - 255.
Camera number. A decimal number in the range 0 - 255
Camera number. A decimal number in the range 0 - 255
Preposition number to be programmed. A decimal number in the range 0
-255.
en | 38