External Interface Manual
8.8
Variable display time of voting results on display
The time to display the results on the unit LCD and HallDisplays can be changed. With the following setting in
DCN.INI this duration can be set. The maximum duration is 200 seconds. If the setting is not in DCN.INI, a
default value of 60 seconds is used.
The following DCN.INI section determines this setting:
[Common Voting]
ViewTimeAfterStop=10
where:
ViewTimeAfterStop
Bosch Security Systems B.V. | 2004 April | External Interface Manual
The time in seconds that the voting results should be
displayed. Time between 0 - 200 seconds.
en | 36