NetCol8000-A013 In-room Air Cooled Smart Cooling
Product
User Manual (600 mm Width)
Figure 3-35 Connecting teamwork cables
Connecting Monitoring Cables
NetCol8000-A013 supports RS485 monitoring.
●
●
Considering the monitoring speed, it is recommended that n be less than or equal
to 8.
Figure 3-36 Connecting RS485 monitoring cables
3.11.6 Cable Routes
The following figure shows how to route the power cables and the signal cable
between the indoor and outdoor units from the bottom.
Issue 04 (2022-11-25)
If there is no teamwork networking, connect the smart cooling products
hand-in-hand and connect the CN17 port on the first smart cooling product
to the monitoring device. n ≤ 255
In teamwork networking, connect the CN17 port on the first smart cooling
product in the teamwork networking to the monitoring device. n ≤ 32
Copyright © Huawei Digital Power Technologies Co., Ltd.
3 System Installation
61