Siemens SIPROCESS GA700 Operating Manual page 70

Operation
4.3 Display
Editing window for list selection (
● Editing window for 1 of N selection:
You can only select and enable one list entry.
● Editing window for M of N selection:
– Several check boxes can be activated at the same time.
– A scroll bar is displayed when you select more than five list elements.
● Both windows:
– Use the <▲> and <▼> keys to select the list entries.
– When you press the <▶> key, a deselected check box or radio button is selected and
– Press <Enter> to apply the change and close the window.
Editing window for input of numerical parameters (
● Use the <0 ... 9> and <▲> or <▼> keys to change the value of the numeric keypad.
● Use the <◀> and <▶> keys to shift the focus to the previous or next numeric keypad.
● Press <ESC> to discard the changes. The originally set value is retained.
● When you press <ENTER>, the currently set value is checked. An error message is
displayed in the editing window if the input is incorrect. Otherwise the window is closed.
Editing window for text input (
● The first character of the text is selected when you open the window.
● Use the <◀> and <▶> keys to move the cursor position within the text.
● Use the <▲> and <▼> keys to select the character you want to use.
Restoring the original setting in editing windows
Note
Function of <UNDO> key
If you have already changed a value in an editing window and then press the <UNDO> key,
the changed parameter is reset to the factory-set default value.
Additional information on the <UNDO> key is also available at → UNDO function (Page 58).
70
vice versa.
① ②
and )
③
④
)
)
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05