Acknowledge Message - Siemens SIPROCESS GA700 Operating Manual

6.16.2

Acknowledge message

Procedure
1. Main menu > Main menu > "3. Maintenance & Diagnostics" > "2. Messages to be
acknowledged" > "1. Messages to be acknowledged"
This menu includes all messages to be acknowledged that match your parameter
assignment under [2.14] Settings > Set message parameters (Page 187). The menu can
have hundreds of entries. The status bar also includes the current date and the current
time. All messages to be acknowledged are assigned instructions for remedial measures.
The menu entries have the following structure:
1)
2)
3)
4)
5)
6)
2. The following information is shown when you open a message:
– Description of cause
– Appropriate remedial measures
– "Acknowledge" parameter field.
– Time incoming
3. Remedy the cause of the message:
The list entry is only deleted in the menu [2.14] Settings > Set message parameters
(Page 187) if you acknowledge the message before and after you remedy the cause.
4. Acknowledge message: "Acknowledge" parameter field.
– Main menu > "3. Maintenance & Diagnostics" > "2. Messages to be acknowledged" >
– This function is triggered immediately after the Standard PIN is entered.
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05
6.16 [3.02] Maintenance & Diagnostics > Messages to be acknowledged
Structure of the navigation lines
1) 2)
1) 2)
Symbol for identification of measuring type
Acknowledgment status. Message not acknowledged:
Message reference: message refers to the device, a module, or a component.
Message number
Message name
Date / time: shows the "Time incoming".
"1. Messages to be acknowledged" > " ... "
Device 0208 Ext. maint. demand 1:
3) 4)
Device 0209 Ext. maint. demand 2:
3) 4)
Functions
Date Time
5)
6) 6)
Shortened message text.... ►
Date Time
5)
6) 6)
Shortened message text.... ►
207