Siemens SIPROCESS GA700 Operating Manual page 120

Functions
6.7 [2.08] Settings > Calibrations
Non-permissible calibration
Table 6- 8
Message
No.
[15]
[16]
[17]
[18]
Table 6- 9
Message
No.
[64]
[65]
[66]
[67]
[69]
[70]
Table 6- 10
Message
No.
[2]
[87]
[89]
[128]
[144]
[145]
[146]
[150]
[153]
See also
Permissibility of calibrations (Page 118)
120
Non-permissibility of calibrations with the following messages for pressure sensors
Text
Sample gas pressure outside tolerance.
Sample gas pressure uncertain.
Reference gas flow measurement uncertain.
Reference gas pressure too low.
Non-permissibility of calibrations with the following voltage messages
Text
Power supply 3.3 V outside tolerance.
Operating voltage 24 V outside tolerance.
Power supply +5 V outside tolerance.
Power supply -5 V outside tolerance.
Power supply +22 V outside tolerance.
Reference voltage 2.5 V outside tolerance.
Non-permissibility of calibrations with the following additional messages
Text
Maximum warming-up time exceeded.
AM parameter memory faulty.
ADC faulty.
SPI communication faulty.
System error
Watchdog reset
Configuration faulty.
Parameter value invalid.
Factory synchronization of the electronics faulty.
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05