DOK-SUPPL*-VAC*01*****-IT04-EN-P
IndraControlVAC 01 Y-Repeater
10
Mounting, demounting and electric installation
10.1
Installation notes
10.2
Housing dimensions
●
The Y-repeater is provided for rear panel mounting
●
The LED displays may not be hidden
●
Provide the following minimum distances for sufficient cooling and
mounting:
–
50 mm to the bottom side
–
80 mm to the upper side
–
80 mm to the front side
●
Lay all connecting cables in loops
●
Provide cables with strain relief
●
Keep as much distance as possible to noise sources when installing the
Y-repeater
●
Keep at least a distance of 10 cm to high-interference cables (e.g. motor
cables) when routing the CDI cables. Avoid parallel cable routing
The Y-repeater has the following dimensions:
Fig. 10-1:
Dimensions of the Y-repeater – rear panel
Bosch Rexroth AG
Mounting, demounting and electric installation
25/53