Table of Contents
Advertisement
DOK-SUPPL*-VAC*01*****-IT04-EN-P
IndraControlVAC 01 Y-Repeater
4
Intended use
The Y-repeater is required to connect two operator displays to a control cabi‐
net PC.
NOTICE
The Y-repeater may be used only as intended and with the accessories,
mounting parts and other components specified in this documentation. Com‐
ponents that are not expressly mentioned must neither be attached nor con‐
nected. The same applies to cables and lines.
Operation must only be carried out with the hardware component configura‐
tions and combinations that are expressly specified.
The Y-repeater can be used for the following IndraControl V device:
●
Control cabinet PC Rexroth IndraControl VSB 40.3
The Y-repeater may only be operated under the mounting and installation
conditions, the position, and the ambient conditions (temperature, degree of
protection, humidity, EMC etc.) specified in the related documentation.
Bosch Rexroth AG
Risk of damaging of the device if not express‐
ly stated accessories, mounting parts and
other components, cables, and lines are
used.
11/53
Intended use
Advertisement
Table of Contents
