Samsung OfficeServ 7200 Installation Manual page 65

OfficeServ 7200 Installation Guide
Setting Network Parameters through MMC 830
Set the system network parameters. (Refer to your network manager.)
1. Set the IP address of the system.
2. Set the subnet.
3. Set the gateway address.
4. Reset the module.
Setting OSM Parameters
1. Execute OfficeServ Manager.
2. Click [Link] [CommSetup] menu on the OSM main screen.
3. Enter the system name into the [Address] field of the [Communications Setup]
window.
© Samsung Business Communications
Module Reset
The module must be reset to apply new settings to the system.
CHAPTER 7. Connecting Stations and Additional Equipment
Page 7-15