Connecting Keyset Daughterboard Modules (Kdb-D / Kdbs / Kdb-F) - Samsung OfficeServ 7200 Installation Manual

Hide thumbs Also See for OfficeServ 7200:

Table of Contents

CHAPTER 7. Connecting Stations and Additional Equipment

Connect the Door Box port of the DPIM to the Line port of the door phone.

If using an automatic door lock, connect the Lock port of the DPIM and the

door phone contact point to the door lock.

The door lock contact point is designed to control a low-voltage relay and uses

24 VDC and 100 mA.

1.8

Connecting Keyset Daughterboard Modules (KDB-D / KDBS /

KDB-F)

KDB-D, KDB-S and KDB-F modules can be installed on a digital phone to enhance the

functions of the phone and increase the number of local ports.

The following example shows how a KDB module is installed on a DS-5000D series

digital phone:

Remove the plastic cover on the bottom of the phone (Fig. 7.13).

Plastic cover

Page 7-10

MMC 211 is used to assign call numbers to door phones.

Connecting a KDB module

KDB modules are only for digital phones connected to the 8DLI module, not the

16DLI module.

Figure 7.13 Installing KDB Module (1)

OfficeServ 7200 Installation Guide

Table of Contents