Connecting A Wireless Lan Access Point (Using Mgi); Table 7.2 Specification For Wireless Lan Connection - Samsung OfficeServ 7200 Installation Manual

CHAPTER 7. Connecting Stations and Additional Equipment
1.4.1 Connecting Modules to Ethernet
WIM/LIM/4DSL/MGI/MCP/SVMi-20E modules can be connected to Ethernet using
an Ethernet cable. The port(s) for connection are:
WIM module - DMZ, LAN, WAN1 and WAN2 port
LIM module - all ports (P1 through P16)
4DSL module - Up Link port (P8)
MCP and MGI modules - LAN port
SVMi-20E - LAN port
Pin No.
Function
1.5

Connecting a Wireless LAN Access Point (Using MGI)

For connecting using the 4WLI module, see section 1.6.
Wireless LAN service offered by the OfficeServ 7200 system requires the follow-
ing equipment:
MGI module : provides VoIP gateway
WBS24 : Wireless LAN Access Point (AP)
WIP-5000M : Wireless LAN IP phone
No. of the MGI modules
Max no of WBS24s (Basic)
Max no. of users (WIP-5000M)
No. of simultaneous users
(WIP-5000M)
Page 7-6
1 2 3
Tx+ Tx- Rx+
Figure 7.8 RJ-45 Port of Modules for Ethernet

Table 7.2 Specification for Wireless LAN Connection

Item
OfficeServ 7200 Installation Guide
RJ-45 port
4 5
- -
OfficeServ 7200 System
Basic Chassis Basic and Expansion Chassis
5
40
120
160
© Samsung Business Communications
6 7 8
Rx- - -
10
40
120
160