Figure 3.9 Jumper Setting Of Wim Module - Samsung OfficeServ 7200 Installation Manual

CHAPTER 3. Mounting and Replacing Modules
3.1.1 WIM Module
The procedure for setting jumpers and mounting optional modules on the WIM
module is as follows:
1. Set jumpers JP1–JP4 on the WIM module (Fig. 3.9).
2. Align the connectors of the WIM module to those of the WIMD optional
module and firmly press the WIMD downward (Fig. 3.10).
Page 3-8

Figure 3.9 Jumper Setting of WIM Module

Figure 3.10 Mounting WIMD Optional Module on WIM Module
OfficeServ 7200 Installation Guide
Using the Ethernet port on the
front panel, connect with the
LIM module in slot 2.
Through the back
panel, connect with
the LIM module in
slot 2.
WIMD
© Samsung Business Communications