Manual Ip Setting - Panasonic AK-HRP1010G Operating Instructions Manual

MANUAL IP SETTING

Item
CAM No. SELECT Select the camera control number to register with the [MENU] dial.
CAM IP Sets the IP address of the camera to be connected.
The setting ranges are as follows.
(IP addresses are assigned in order starting with 192.168.0.20 for CAM1 under factory default conditions.)
1st octet: 1 to 223
2nd octet: 0 to 255
3rd octet: 0 to 255
4th octet: 1 to 254
PORT Sets the port of the camera to be connected.
Values from 1 to 65535 can be set.
(Factory default: 49152)
SAVE Press the [MENU] dial and then set the following items for the camera number selected in [CAM No. SELECT].
IP
PORT
When settings are changed, they will not be applied if you do not perform a save.
NOTE
Performing [SAVE] after changing the settings will apply the setting value changes. The changes will not be applied on the unit
unless [SAVE] is performed.
C 0 1 : A K - U C 4 0 0 0
M A N U A L I P S E T T I N G
CAM No.
SELECT
CAM1
CAM IP
192 168
PORT
49152
- 127 -
1 / 1
0 20
SAVE
(push)
Setting details
ROP menu