Panasonic AK-HRP1010G Operating Instructions Manual page 116

Item Setting value
SKIN DTL SW UHD
HD
B. GAMMA SW SDR
HDR
PAINT VOL MD STD
MODE1
MODE2
STD POSI M. -6 to 0 to +36
GAIN
STD POSI VAR -2.9 to 0.0 to +2.9
STD POSI ND 1 to 2 to 5
STD POSI CC A to E
Selects the target of skin tone detail control operations on the panel.
UHD: Control UHD skin tone detail.
HD: Control HD skin tone detail.
SDR: This is the switch of the BLACK GAMMA menu.
HDR: Controls ON/OFF of B.GAMMA in HDR-PAINT.
Controls the range controllable by the ROP using menus.
<Current state>
R/G/B Gain: Range of CAM ±1000 (control range of ROP is ±256)
BLACK: Range of CAM ±800 (control range of ROP is ±128)
FLARE: Range of CAM ±200 (control range of ROP is ±64)
The setting parameters are as follows.
STD
R/G/B Gain: ±256
BLACK: ±128
FLARE: ±64
MODE1: About half the control range of STD.
MODE2: About one-third the control range of STD.
Sets the standard position of the master gain (M.GAIN).
Sets the standard position of the master gain (M.GAIN) step value.
Sets the standard position of the ND filter.
Sets the standard position of the CC filter.
- 116 -
Setting details
ROP menu