GE Dash Port 2 Service Manual page 91

Replace the Connector Assembly FRU or PCB FRU
054A
Revision A
Part Lists, Drawings, and Replacement: Disassembly/Assembly of FRUs
048A
047A
049A
046A
Dash Port 2 Docking Station
2000966-138
1. "Separate the Top and Bottom Housings"
page 6-17.
2. Stabilize the PCB LED connector and gently
remove the AC power indicator light pipe.
3. "Separate the Top and Bottom Housings"
page 6-17.
4. Stabilize the PCB LED connector and gently
remove the communication indicator light pipe.
5. If the light pipes are defective, replace them.
a. Push the light pipes out from the bottom
assembly housing.
b. Discard the defective light pipes.
6. Use a 10 mm wrench or nut driver to remove
the equipotential lug.
on
on
6-19