Setup/Configure
Adjust the Remote Display (Option) Video Signal
3-12
Installation: Setup/Configure
Some remote displays will automatically adjust to the docking station's
video output signal. Other remote displays may require a manual
adjustment.
Automatic Adjustment
1. Power up the monitor and the remote display.
2. From the monitor, select MORE MENUS > PATIENT DATA >
VITAL SIGNS.
3. Verify the Vital Signs NRT displays correctly on the remote display.
a. If the remote display image is good, no manual adjustments are
required.
Good Remote Display Image - No Adjustement Required
b. If the remote display image is very blurry or cut-off, complete a
"Manual Adjustment"
Dash Port 2 Docking Station
2000966-138
on page 3-13
040A
Revision A