Table of Contents
Advertisement
Updating software
immediately
Software update starts immediately.
There are 2 ways to activate software update:
･
activating from Software update notice
screen and activating from the menu.
From the Home screen,
1
u
[Settings]
[Software Update].
[Start the software update]
2
For activating from Software update
･
notice screen, display the Software
update notice screen
After a message for rewriting start
3
appears, rewriting starts
automatically in approximately 10
seconds.
Tap [OK] to start rewriting
･
automatically.
While updating the software, all key
･
operations become disabled. Also,
updating cannot be canceled.
When the software update is complete,
･
the terminal restarts and the Home
screen is displayed.
❖ Information
If software update is not needed, "No update is
･
needed. " is displayed.
u
u
[About phone]
u
[Yes].
u
[Start update].
Post-update display
■
appears on the status bar. Drag the
status bar downwards
notification, a message indicating that
software update is complete appears.
Reserving software update
You can preset time to update the software if
you want to specify another time for
installing the update file.
Display the Software update
1
notice screen
u
Set a time
[Set].
2
When the reserved time is reached
■
When the reserved time is reached, a
message for rewriting start appears, then
rewriting starts automatically in
approximately 10 seconds.
❖ Information
While updating the software, all key operations
･
become disabled. Also, updating cannot be
canceled.
If software update could not be started at the preset
･
time, the software update will be performed at the
same time the following day.
While upgrading Android software, software update
･
is not executed even when the set time arrives.
When an alarm etc. is set at the same time as the
･
reserved time, priority will be given to the software
update.
u
Tap the
u
[Set Time].
Appendix/Index
214
Advertisement
Table of Contents
