Setting network mode
From the Settings screen,
1
u
[Settings]
u
networks]
[Network Mode].
Tap any of [LTE (preferred)/3G/
2
GSM]/[LTE/3G]/[3G/GSM]/[3G
only]/[GSM only].
If you select "LTE (preferred)/3G/GSM"
・
to switch available network
automatically.
Display
During international roaming,
the status bar.
You can confirm the name of the connected
・
network operator on the Notification panel.
❖ Note
While
appears on the status bar, packet
・
communication is available. Note that packet
communication charge may become high.
u
u
[More...]
[Mobile
appears on
Date & time settings
When "Automatic date & time", "Automatic
time zone" in "Date & time" are marked, the
date, time and time differences of the
terminal clock are corrected by receiving the
information related to time and time
differences from the network of overseas
network operator you connect to.
Correction of the time/time differences may
・
not be performed correctly depending on the
network of overseas network operator. In that
case, set time zone manually.
Timing of correction varies by the overseas
・
network operator.
Setting Date & time (P.173)
・
About inquiries
For loss or theft of the terminal or docomo
・
nano UIM card, immediately contact
DOCOMO from the spot to take the necessary
steps for suspending the use. For inquiries,
refer to the last page. Note that you are still
liable for the call and communication charge
incurred after the loss or theft occurred.
For using from land-line phone, entering
・
"International call access code" or "Universal
number international prefix" for the country is
needed.
International roaming
193