Cannot use the terminal overseas (when
is displayed)
Check if you are out of the international
・
roaming service area or in an area with
poor signal strength. Check if the service
area and network operator are available,
referring to "Mobile Phone User's Guide
[International Services]" or DOCOMO
International Services website.
Change the network settings or overseas
・
network operator settings.
- Set "Network mode" to "LTE (preferred)/
3G/GSM".
P.193
→
- Set "Search mode" to "Automatic" in
"Service providers".
Turning the power off and on may solve
・
the problem.
P.37
→
Cannot perform data communication
overseas.
Mark "Data roaming".
・
The terminal suddenly became
unavailable while using overseas.
Check if usage amount exceeds the limit
・
of maximum charges for use.
For use of "International roaming (WORLD
WING)", the limit of maximum charges for
use is set in advance. If exceeding the limit
of maximum charges for use, pay the
charges.
P.192
→
P.192
→
Cannot receive calls overseas.
Is "Restricting incoming calls" set to
・
"Activate restriction"?
No caller ID is notified/a notified caller ID
is different from that of the caller/
functions for using contents saved in
phonebook or those using Caller ID
notification do not operate.
Even if a caller notifies its caller ID, it is not
・
displayed on the terminal unless the
network or network operator notifies it.
And a different caller ID may be notified
depending on the network or network
operator you use.
Data management
■
Data transfer is not performed.
Check if USB hub is used. If you use USB
・
hub, operations may not be performed
correctly.
Data saved in microSD card is not
displayed.
Remove and attach the microSD card.
・
P.177
When trying to display an image, " "
appears instead of it.
Or " " appears for the demo play or the
preview function.
" " may appear instead of destroyed
・
image data.
P.196
→
→
204
Appendix/Index