Setting an access point
An access point for connecting to the
Internet (sp-mode) is already registered. You
can add or change it if necessary.
For using mopera U, Business mopera
Internet add the access point manually.
For details on mopera U, refer to mopera U
website.
Checking the access point in use
From the Home screen,
1
u
[Settings]
u
networks]
[Access Point Names].
It is recommended that you use the
・
displayed access point without editing.
❖ Information
Radio button on the right of current access point is
・
marked.
u
u
[More...]
[Mobile
Setting an access point additionally
From the Home screen,
1
u
[Settings]
u
networks]
[Access Point Names].
.
2
u
[Name]
Enter a name
3
u
[APN]
Enter an access point
4
u
name
[OK].
Tap and enter all other
5
information required by your
network operator.
u
[Save].
6
❖ Information
Do not change the MCC/MNC when setting the APN.
・
If you change them to values other than the default
values (440/10), the set APN will not be displayed on
the APN screen. If the set APN is not displayed,
u
Tap [Reset to default] or
again.
Initializing an access point
From the Home screen,
1
u
[Settings]
u
networks]
[Access Point Names].
u
[Reset to default].
2
u
u
[More...]
[Mobile
u
[OK].
, then set the APN
u
u
[More...]
[Mobile
Settings
154