Table of Contents
Advertisement
Error messages
No service
●
The terminal is out of service area, or the
･
received signal is too weak. Move to a
location where radio signal can be
reached.
The docomo nano UIM card is not
･
working properly.
Insert the docomo nano UIM card in
another terminal. If this works, it is
probably the terminal that is causing the
problem. In this case, contact "Repairs" on
the last page of this manual (in Japanese
only).
Removing and inserting docomo nano
UIM card may solve the problem.
Mobile network not available
●
Install docomo nano UIM card correctly
(P.30), then move to a location where radio
signal reaches.
Normal calls are restricted by access
●
control.
Appears when normal voice call service is
hard to receive because communication
lines are busy.
Emergency calls are restricted by access
●
control.
Appears when emergency voice call service
is hard to receive because communication
lines are busy.
Calls are restricted by access control
●
Appears when normal/emergency voice
call service is hard to receive because
communication lines are busy.
Restricted access changed
●
Appears when the voice service or data
service is not received.
SIM card is locked
●
Enter your PIN code (P.167) correctly.
SIM card is PUK-locked
●
Enter your PUK (Personal Unblocking Key)
(P.168) correctly.
PIN lock disable code is locked.
●
PIN lock disable code is locked. Please
contact a docomo Shop.
Memory is getting low
●
Available memory space in the terminal is
low. If you continue to use the terminal,
some functions or applications may not
work. Activate the setting screen and select
unnecessary applications, then tap
[Uninstall] to delete the applications (P.163).
Memory full.
●
There is no memory space in the microSD
card. Delete unnecessary data (P.178) to
save the memory space.
206
Appendix/Index
Advertisement
Table of Contents
