Dme-3000 - Sony DME-7000 Maintenance Manual

1-9-1. DME-3000

1
2
3
4
5
6
7
8
9
Slot No.
Front view
Note:
1. The boards shown by (
2. (Line) : Standard board.
(Dotted line) : Optional board.
Slot No. Standard boards
1 CPU-114
2 –––
3 MPU-70
4 –––
5 –––
6 –––
7 –––
8 DPR-35
9 –––
m
• Insert the appropriate I/O board for your system in slot 9. By inserting one of the four available I/O
boards you can switch between component and composite modes.
• When using a component mode, make the appropriate settings for the "525/625" and "4:3/16:9"
switches in the BKDM-3010 SYSTEM menu.
• For connecting procedures of the MPU-70 board and MPU-72 board, the MPU-72 board and MPU-80
board, the WKG-13 board and WKG-16 board, refer to the section 1-10.
) mark are optional boards.
Optional boards (Model name)
–––
–––
MPU-72(BKDM-3030) with MPU-80(BKDM-7031)
WKG-13(BKDM-3040) with WKG-16(BKDM-7041)
CMB-1(BKDM-3050)
–––
KPC-2(BKDM-3060)
–––
VIF-9A(BKDM-3020)
VIF-6A(BKDM-3021)
VIF-9(BKDM-3022)
VIF-6(BKDM-3023)
VIF-16(BKDM-7020) with DI-33(BKDM-7020)
1-9. Installation of Standard Boards
CPU-114 board
Not used
MPU-70 board alone or
MPU-70 board with (MPU-72 board) or
MPU-70 board with (MPU-72 board)
and (MPU-80 board)
(WKG-13 board) alone or
(WKG-13 board) with (WKG-16 board)
(CMB-1 board)
Not used
(KPC-2 board)
DPR-35 board
One of (VIF-6 board), (VIF-6A board), (VIF-9 board),
(VIF-9A board), (VIF-16 board) with (DI-33 board)
1-27 (E)