Replacement Of Main Parts; Floppy Disk Drive; Key Top - Sony DME-7000 Maintenance Manual

3-4. Replacement of Main Parts

3-4-1. Floppy Disk Drive

1. Remove the bottom plate. (Refer to the section 3-2.)
2. Remove the three screws securing the floppy disk
drive and FD bracket.
Floppy disk drive
3. Remove the four screws, then remove the floppy disk
drive.
PS2.6 x 4
4. Install a new floppy disk drive in the reverse order of
the steps 1 through 3.
BVWH3 x 8
BVWH3 x 8
Floppy disk drive
FD bracket
PS2.6 x 4

3-4-2. Key Top

Only when using DME-7000
When using DME-7000, change the two key tops shown in
the figure for the two supplied key tops with BZDM-7020
(Option).
CH3 CH4
SWITCH
F1 F2 F3 F4
WINDOW
GLBL CH1 CH2
FLIN
CLIRSR
CTRL
SPCE TRGT
Cap pull tool
The key top can be extracted manually, but can be more
easily removed using a cap pull tool.
• Cap pull tool: 3-179-054-01
<Use of tool>
1. Put the cap pull tool into the one side of the key top.
2. Pull out the key top by hooking the end of the tool.
Cap pull tool
3-4. Replacement of Main Parts
F5 F6 F7 F8 EXIT
10 20 30 40 50 60 70
LAST
BKGD FREZE PIX VIDEO IN PATH EFF
MENU
EDGE RECUR MOD MOD OUT CTRL UTLTY
100 200 300 400 500 600 700
NON- GRAPH LIGHT SHOT STATS SET/ FREZE
LINEAR EFF BOX DIAG
KNOB KNOB KNOB
PAGE
LEFT CTR RIGHT
Hook the tool here and
pull out the key top.
3-3 (E)