Yamaha AW2816 Owner's Manual page 350

SCENE screen
Specify the fade time
Function
Specify the time over which the faders
will reach their new locations when a
scene is recalled.
Key operation
• [SCENE] key [F2] (Fade Time) key
• Repeatedly press the [SCENE] key
until the screen shown at the right
appears.
Screen functions
A
FADE TIME SETTING
This specifies the time over which the faders of
each channel will move to their new locations
(fade time) when a scene is recalled. The fade time
can be set in 0.1 second steps over a range of 0.0–
25.0 seconds. Fade time can be specified for the
following channels.
• Input channels 1–8
• Monitor channels 1–16
• Return channels 1/2
• Stereo output channel
• The fade time is memorized for each scene. After set-
ting the fade time, you must be sure to store the
scene.
• The fade time must be set for the recall destination
scene. Even if the fade time has been specified for
the current scene, there will be no effect if the set-
ting of the recalled scene is 0.0 seconds.
348
Fade Time page
Additional functions in the Fade
Time page
In the Fade Time page you can press the [SHIFT] key
to assign the following additional function to the [F5]
key.
• [F5] (COPY TO ALL) key
Copy the fade time setting selected by the cursor
to all other channels.
Reference section
1