Commands And Parameters Of The Region Menu; Operations - Yamaha AW2816 Owner's Manual

Commands and parameters of
the REGION menu
The REGION menu contains commands that edit the
desired region (continuous audio data that was
recorded in one operation) of audio. The following
pages describe the commands and parameters that
can be selected from the REGION menu.
Settings/parameters marked by an asterisk (*) cannot
be selected in the V.TR Edit page.
NAME
Edit the name (region name) of the region.
• REGION
Select the region whose name you want to edit.
• NAME
Access a NAME EDIT popup window where you
can input the new name. Input the name in the
popup window, move the cursor to the OK but-
ton and press the [ENTER] key to finalize the new
name.
Tip!
• Regions created during recording will automatically
be given a default name of "VTxy (x= track number
1–16, y= virtual track number 1–8).
• Regardless of the track/part/region unit, the region
name will be copied whenever audio data is copied.
ERASE
The selected region will be erased. If all regions in a
track are erased, the track name will change to "-NO
REC-".
• REGION
Select the region that you want to erase.
• EXECUTE
Execute the command.
DELETE
The selected region will be deleted. Subsequent audio
data will be moved forward according to the length of
the deleted region. If all regions in a track are deleted,
the track name will change to "-NO REC-".
• REGION
Select the region that you want to delete.
• EXECUTE
Execute the command.
COPY
Copy the selected region to the specified location of
the specified track.
• REGION
Select the region that you want to copy.
• TO TRACK
Select the copy destination track.
• TO START
Specify the starting time of the copy destination.
• TIMES
Specify the number of times (1–99) that the data
will be copied.
• INTERVAL
If you set the TIMES parameter to 2 or higher to
make multiple copies, specify the spacing of the
copy start locations. It is not possible to set this
shorter than the length of the selected region.
• INSERT
Select whether the copied audio data will be
inserted into the copy destination track (Insert) or
overwritten (OverWrite).
• EXECUTE
Execute the command.
MOVE
Copy the selected region to the specified location of
the destination track. At this time, the move source
region will be erased.
• REGION
Select the region that you want to move.
• TO TRACK
Select the move destination track.
• TO START
Specify the starting time of the move destination.
• INSERT
Select whether the region will be inserted into
the move destination track (Insert) or overwritten
(OverWrite).
• EXECUTE
Execute the command.
DIVIDE
Divide the selected region into two regions at the
desired location.
• REGION
Select the region that you want to divide.
• DIVIDE
Specify the location at which you want to divide
the region.
• EXECUTE
Execute the command.
Operation section
7
125