Yamaha AW2816 Owner's Manual page 339

Import a track from an existing song
Function
Import a track from a song on the inter-
nal hard disk into the desired track of
the current song.
Key operation
• [EDIT] key [F5] (TR Import) key
• Repeatedly press the [EDIT] key until
the screen shown at the right appears.
Screen functions
A
Song list
This area displays a list of the songs saved in the
internal hard disk. The highlighted row indicates
the current song, and the row enclosed by a dotted
line is the song selected as the import source. To
select the import source song, move the cursor
into the song list and turn the [DATA/JOG] dial.
The song list displays the following information.
• DEST. SONG NAME
Song name (only the first 16
characters)
• SAVED AT............ Date and time at which the
song was last saved
• SIZE..................... Song data size
• BIT/FS ................. Song quantization and sam-
pling rate
• PRT...................... Song protect on/off ( P.238)
• Only a song with the same quantization and sam-
pling rate as the current song can be selected as the
import source.
• The current song cannot be selected.
B
SOURCE TRACK
From the song selected in the song list (1), select
the track number (1–16) and virtual track number
(1–8) of the track that you wish to import. The
name of the selected track is displayed at the right.
• This parameter will be valid only after you have used
the LOAD button ( 4 ) to load the track information
for the selected song.
• The track name is not included in the data that is
imported.
TR Import page
1
2
3
C
DEST. TRACK (destination track)
Specify the track number (1–16) and virtual track
number (1–8) for the import destination track. The
name of the selected track is displayed at the right.
This display will appear only after you have used the
TRACK CLIP button ( 5 ) to register the desired track
from the import source song.
D
LOAD button
When you move the cursor to this button and
press the [ENTER] key, track information for the
song selected in the track list will be loaded.
E
TRACK CLIP button
When you move the cursor to this button and
press the [ENTER] key, the track selected in
SOURCE TRACK (2) will be registered as the
import source.
This button will be valid only after you have used the
LOAD button ( 4 ) to load the track information for the
song.
F
EXECUTE
This button executes the Track Import operation.
For details on the procedure, refer to page 156.
• This button will be valid only after you have used the
• The keys of the transport section will have no effect
Reference section
TRACK CLIP button ( 5 ) to register the import source
track.
in the TR Import page.
4
5
6
337