Yamaha AW2816 Owner's Manual page 308

DYN/DLY screen
Dly/ø1–8/Dly/øMONI page
Delay/phase settings
Function
Set the delay and phase of the input
channels, return channels, and monitor
channels.
Key operation
• [DYN] key [F3] (Dly/ø1–8) key, [F4]
(Dly/øMONI) key
• Repeatedly press the [DYN] key until
the desired page appears.
Screen functions
A
Channel
This area indicates the channel for which delay/
phase settings will be made.
B
DELAY
Here you can specify the time (delay time) by
which the input signal of each channel will be
delayed. Of the two numerical boxes, the upper
box shows the delay time in millisecond units, and
the lower box in sample units. Editing either value
will cause the other value to correspond.
Tip!
Unlike a conventional delay, the main use of this delay
is to correct the timing of the input signal. For example
you can use this to apply delay to a monitor channel to
make the rhythmic feel "lag," or when recording to
compensate for time differences between mics that are
placed at a distance from each other.
The delay time range for the millisecond adjustment
will depend on the sampling frequency of the song.
The range will be 0–54.2 milliseconds if the sampling
frequency is 48 kHz, and 0–59 milliseconds if the sam-
pling frequency is 44.1 kHz. When adjusting in sample
units, the range will be 0–2600 samples regardless of
the sampling frequency.
C
On/off
These buttons switch the delay on/off.
Tip!
For channels that are paired, the delay time and on/off
settings will always change in tandem.
306
1
2
3
4
D
ø (Phase)
These buttons switch the phase of the input signal.
The phase is normal when the button indicates N
(normal), and reversed when the button indicates
R (reverse).
Tip!
• The phase setting can be made independently even
for paired channels.
• If you press a [SEL] key when this page is displayed,
the cursor will automatically move to the location of
the corresponding channel. (The Dly/ø1–8 page and
Dly/øMONI page will automatically switch as neces-
sary.)
Additional functions in the Dly/
øpages
In the Dly/ø1–8, Dly/øMONI pages you can press the
[SHIFT] key to assign the following additional func-
tion to the [F5] key.
• [F5] (COPY TO ALL) key
Copies the delay time/phase settings of the chan-
nel selected by the cursor to all channels including
those in other pages.
Reference section