Yamaha AW2816 Owner's Manual page 286

PATCH screen
Patch signals to output jacks/output channels
Function
Assign output signals to the OMNI
OUT connectors, STEREO OUT con-
nectors, DIGITAL STEREO OUT con-
nector, and the output channels of I/O
card.
Key operation
• [PATCH] key [F2] (Patch OUT) key
• Repeatedly press the [PATCH] key
until the display shown at right
appears.
Screen functions
A
OMNI OUT ASSIGN
B
OPTION I/O SLOT OUT ASSIGN
In these areas you can select the signals that will
be assigned to the OMNI OUT 1–4 connectors
and to the output channels of an I/O card installed
in the OPTION I/O slot, respectively. The follow-
ing signals can be assigned.
Display
ST L/ST R Stereo output channel L or R
BUS 1 – BUS 8 Bus 1–8
Direct output of input chan-
DIR 1 – DIR 8
nels 1–8
AUX 1 – AUX 6 AUX buses 1–6
RDR 1 – RDR 16 Direct output of tracks 1–16
284
Patch OUT page
1
3
2
C
D
Signal type
Reference section
D.ST OUT ASSIGN (Digital stereo out
assign)
ST OUT ASSIGN (Stereo out assign)
In these areas you can select the pairs of output
signals that will be assigned to the DIGITAL STE-
REO OUT connector and STEREO OUT connec-
tor, respectively. The following signals can be
assigned.
Display
ST L/R Stereo output channel (L/R)
BUS 1/2 – BUS 7/8 Buses 1/2–7/8
Direct output of input chan-
DIR 1/2 – DIR 7/8
nels 1/2–7/8
AUX 1/2 – AUX 5/6 AUX buses 1/2–5/6
RDR 1/2 – RDR 15/ Direct output of tracks 1/2–
16 15/16
4
Signal type