Panasonic WJ-SX 150A Operating Instructions Manual page 129

• Record List/Thumbnail Display
You can operate the Record List or Thumbnail Display by
referring to the recorder's operating instructions. In addi-
tion, the following operations from the system controllers
are also available.
• Record List
DATE MAY29.00
NO
000010009
000010008
000010007
000010006
000010005
000010004
000010003
000010002
SEARCH:
ALARM # SEARCH:[DISPLAY]
SEL:
Search Editing Area
• Thumbnail Display
000010009
000000013
SEARCH
000000009
000000005
Search Editing Area
Joystick to UP (D): Moves the cursor up.
Joystick to DOWN (C): Moves the cursor down.
Joystick to L (A): Moves the cursor to the left.
Joystick to R (B): Moves the cursor to the right.
CAM(SET) button: Displays the search editing area./Starts
the search after you enter the search condition.
MON(ESC)button: Cancels the search editing area and
returns to the Record List or Thumbnail Display.
NEXT button: Increments a parameter.
PREV button: Decrements a parameter.
PLAY button: Starts the playback of a record pointed by
the cursor.
Note: The PLAY button is deactivated in the search editing
area.
Electronic Zooming (EL-ZOOM)
Playback images can be electrically zoomed besides a
camera's optical zooming.
1. Enter the recorder mode (Refer to p. 131 Recorder
Mode.)
2. Press the PLAY button.
3. Press the numeric button corresponding on the desired
camera number to display the spot picture.
133
ALL GROUP
GROUP TIME REC-MODE
G2 23:59:59 T/L
G1 22:15:40 M/S ALM-TRM12
G3 21:00:07 O/S ALM-VMD3
ALL 17:33:05 T/L
ALL 7:23:11 T/L EMR
G4 6:59:44 M/S ALM-PC4
8:55:28 T/L MAN
ALL
G3 0:01:28 T/L ALM-TRM1
(TOTAL 2343RECORD)
MAY29.00 0:01 G1
CHG:+– EXE:SET ESC:FSTOP
000010008 000010007 000010006
000000012 000000011 000000010
MAY29.00 0:01 G1
000000008 000000007
000000006
000000004 000000002
000000003
4. Press the CAM (SET) button.
The selected camera's picture is displayed in the spot
mode.
5. Each time the button 4 and the SHIFT button are
pressed, the zooming range are changeable as follows:
2x 4x 8x 1x
UP
L
DOWN
F2 GROUP SEQ TOUR SEQ
INDEX REW/FF
PREV NEXT
STEP
RECORDER
STOP PAUSE
STOP PLAY PAUSE
OSD
SETUP
SHIFT
6. To return the zooming range to x 1, press the button 4
while holding down the SHIFT button again.
7. To return to the multiscreen display, press the button 0
while holding down the SHIFT button.
Note: You can move the zoomed area on the monitor
with the joystick after Step 5.
2x
R
T&D CAM ID EVENT
AUX1 OFF AUX1 ON
STILL
MON STATUS ALL
AUX2 OFF AUX2 ON
EL-ZOOM
ALM H VLD H SYS S
DEF OFF DEF ON
SEQUENCE
MON (ESC) CAM (SET)
MON LOCK WIPER
MULTI SCREEN SEL