Panasonic WJ-SX 150A Operating Instructions Manual page 107

CAMERA FUNCTION CONTROL
Camera Setup
1. Select the desired monitor and camera. (Refer to p. 106
Monitor Selection and p. 107 Camera Selection.)
2. Press the F1 button while holding down the SHIFT but-
ton.
The CAM SETUP indicator on the controller will light up
and the camera's SETUP MENU will appear on the
active monitor.
F1 ACK
CAM SETUP SUSPEND
F2 GROUP SEQ
INDEX REW/FF
PREV
RECORDER
STOP
STOP PLAY
OSD
SETUP
3. To select the desired item in the menu, move the joy-
stick to or
mode) in the menu, move the joystick to t or s.
4. To execute the currently highlighted selection and to
enter a submenu of SETUP MENU, press the CAM
(SET) button.
5. To leave from the currently selected menu and to return
to the previous page of the menu, press the MON (ESC)
button.
6. Move the cursor to SPECIAL on the camera's setup
menu, and press numeric buttons 4 and 6 simultane-
ously for 2 seconds or more to display the special
menu.
7. Move the cursor to CAMERA RESET on the camera's
setup menu, and press buttons 4, 5 and 6 simultane-
ously to reset all the functions to the defaults.
Notes:
• Refer to the operating instructions of the selected
camera for details.
• Move the joystick while holding down the SHIFT
button to move the camera smoothly for presetting
the positions in the camera's SETUP MENU.
8. To close the camera's SETUP MENU, press the F1 but-
ton while holding down the SHIFT button.
The CAM SETUP indicator goes off.
110
RESET
ALL RESET
TOUR SEQ
T&D CAM ID EVENT
AUX1 OFF AUX1 ON
STILL
NEXT
MON STATUS ALL
AUX2 OFF AUX2 ON
STEP EL-ZOOM
PAUSE
ALM H VLD H SYS S
DEF OFF DEF ON
PAUSE SEQUENCE
MON (ESC) CAM (SET)
MON LOCK WIPER
SHIFT MULTI SCREEN SEL
. To select the desired parameter (or
Camera Function (Shortcut
Function)
The following function is available only when specified cam-
eras with the camera function feature are used.
This function enables executing camera functions via a
shortcut.
1. Select the desired monitor and camera. (Refer to p. 106
Monitor Selection and p. 107 Camera Selection.)
2. Press the AUTO PAN button while holding down the
SHIFT button.
"F_ _ _ _" will appear on the LED display of the con-
troller as shown in the figure.
CALL
PRESET
PROGRAM
PRESET
AUTO PAN
CAM FUNC
F1
CLEAR
CAM SETUP
LOG OUT
F2
INDEX
RECORDER
STOP
STOP
SETUP
3. Press the numeric buttons to select an assigned func-
tion number, then press the CAM (SET) button.
For example, enter 175 for AGC ON.
The selected function will be executed on the active
monitor.
Notes:
• When you select a wrong number, press the CLEAR
button to clear the numeric input.
• Refer to the cameras' operating instructions for
details on available shortcuts.
4. To exit from the mode, press the MON (ESC) button
then press the AUTO PAN button while pressing the
SHIFT button.
ACK RESET
SUSPEND ALL RESET
GROUP SEQ TOUR SEQ
T&D CAM ID EVENT
REW/FF AUX1 OFF AUX1 ON
STILL
PREV NEXT
MON STATUS ALL
AUX2 OFF AUX2 ON
STEP EL-ZOOM
PAUSE
ALM H VLD H SYS S
DEF OFF DEF ON
SEQUENCE
PLAY PAUSE
MON (ESC) CAM (SET)
OSD
SHIFT MON LOCK MULTI SCREEN SEL WIPER
CALL
PRESET
PROGRAM
PRESET
AUTO PAN
CAM FUNC
CLEAR
LOG OUT