Yamaha SIGMA-G5SII Service Information page 12

Step 3 Remove the black pin located on the upper section of the breaker.
Fig. A5-1
Step 4 Push the claw to the left and pull the terminal cover to this side to remove.
Step 5 After the power cable is crimped in the round terminals, connect the cable to the breaker
primary side.
* If the cable is connected directly to the terminals without crimping, the breaker
section might catch fire.
The earth cable is connected to the plate "PE" section through the round terminal.
AC 200V
Fig. A5-3
Fig. A5-5
Service Information
SI1705004E-00=SIGMA-G5SII Service Manual
12/273
For Service Engineer
Fig. A5-2
Fig. A5-4
PE
Fig. A5-6