How To Use The L-Type Line Alignment Jig With The Glass Board's Frame; How To Use The Offset Line Alignment Jig Set - Yamaha YSP10 Service Information

1.2.2. How to use the L-type line alignment jig with the glass board's frame

1
KKE-M8811-00, see Note.

1.2.3. How to use the offset line alignment jig set

Before using the offset line alignment jig, reassemble the LINE MEASURE 1 in advance.
Remove the knob of the LINE MEASURE 1.
LINE MEASURE 1
（KLF-M8810-A0）
Glass board's frame
2 2
Service Information
1
7/120
SI1906002J-002 : YSP10 installation and adjustment procedures
For Service Engineers
Fit the jigs against the
1
conveyor rail in the direction
of arrows  .
While preserving the
2
condition of  , press the
jigs with each other.
Note
KKE-M8811-10 can
also be used.
Remove the knob.