Line Alignment Jig Arrangement - Yamaha YSP10 Service Information

1.2. Line alignment jig arrangement

The following line alignment jigs are available.
L-type line alignment jig set

See "1.2.1 How to use the L-type line alignment jig set" on page 6 for how to use the jig set.
KKE-M8811-00
KKE-M8811-10
Description
L-type line alignment jig set
Note
Either KKE-M8811-00 or KKE-M8811-10 can be used with a glass board with its glass portion
removed (see below figure) as a jig set.
Glass board KM0-M8810-40 or KM0-M8810-10 with its glass portion removed

Use either board with its glass portion removed with KKE-M8811-00 or KKE-M8811-10 as a jig set. See
"1.2.2 How to use the L-type line alignment jig with the glass board's frame" on page 7 for how to use
the jig set.
Description
Glass board with its glass
removed
Part name Part number
PLATE JIG SET KKE-M8811-A0
Part name
FRAME,GLASS PCB 8-0
5/120
SI1906002J-002 : YSP10 installation and adjustment procedures
For Service Engineers
Service Information
Q'ty
1 set See Note below.
Part number Q'ty
KM0-M8811-80 1
Remarks