Sony GBL-T3 Settings Manual page 3

Preset of motor parameters
To use the gimbal correctly, you need to enter the appropriate motor parameters
for your camera and lens. This section describes how to manually enter motor
parameters and how to apply presets all at once.
Sections:
1. How to input motor parameters with Airpeak Flight
2. Apply preset at once
1. How to input motor parameters with Airpeak Flight
Tap "Settings" at the top right of the Airpeak Flight app screen.
1
Tap [Gimbal] from the displayed setting menu.
2
Tap [Main Tuning] to display the parameter setting screen for motor control.
3
Each parameter value can be changed by moving the slide bar or tapping the value on the
4
right side and entering the value via the on-screen keyboard that is displayed.
2. Apply preset at once
Tap "Settings" at the top right of the
1
Airpeak Flight app screen.
Tap [Gimbal] from the displayed setting menu.
2
Tap [Main Tuning] to display the parameter
3
setting screen for motor control.
Tap [Start] in [Apply a preset] menu at the
4
top of the motor parameter setting screen.
Select a camera and lens and apply motor
5
parameter presets.
Once applying preset has been done, refer
to Trouble Shooting in Manual adjustment
of motor parameters section as needed.
Airpeak gimbal setting guide
I
Preset of motor parameters
5
Note: The preset values of the motor parameters are
the values under the condition without a lens hood,
and with a filter attached.
Check "Compatibility" to know the camera body
and lens supported by this product.
3
Main tuning
4
Apply a preset Start
2