Advertisement
Hint: When the initial position of gimbal is not level
The angle can be adjusted with the controller.
• Use a remote controller in operation role "Sub".
• Tap
"Settings" in the top right on "Airpeak Flight".
• Tap "Remote controller" in the displayed setting menu.
• Tap "Stick" and select "Mode 3" or "Mode 4" in the "Stick operation mode" menu.
• Tilt the left stick left and right to balance the gimbal horizontally.
Software
gTuneDesktop is a PC software developed by Gremsy. By connecting to Gremsy gimbal,
the software can:
• Change parameters
• Calibrate the sensor
• Check the position of gimbal
• Update firmware
Get USB derive and software from following websites.
Installers
USB Driver
1
Download Universal Windows Driver from below site.
Download
*This link will direct you to Silicon Laboratories, Inc website.
gTuneDesktop
2
Download
* This link will direct you to GitHub, Inc website.
Airpeak gimbal setting guide
I
Calibration
14
Advertisement
