5.2
Commissioning with SENTRON powerconfig for PC
Alternatively, the circuit protection devices with communication and metering function can
also be (re)configured with the SENTRON powerconfig PC software. First the
7KN Powercenter 1000 must be added from the same network. Then the individual terminal
devices must be added in the "Overview" view.
The recommended alternative is to export an existing project from the
SENTRON powerconfig app once commissioning has been completed. In doing so, a .splx file
is stored on the smartphone, which can be imported as a PC version. In addition, the project
data and parameters can be easily viewed and further processed on the PC. The extended
range of functions of the SENTRON powerconfig PC version also enables a firmware update.
Similarly, a .splx file could be exported from the PC version, archived on the PC and imported
in the SENTRON powerconfig app.
Circuit protection devices with communication and metering function
System Manual, 06/2021, L1V30827018B-01
5.2 Commissioning with SENTRON powerconfig for PC
Commissioning
43