Installation and connection
4.2 Device installation
Note
In case of increased ambient temperatures, a correction factor must be applied for the rated
current. This applies to the 3NA COM fuse at a temperature of > 40°C and the 5SV6 COM arc
fault detection device or the 5SL6 COM miniature circuit breaker at temperatures > 30°C
according to the respective configuration manual of the product family.
See also
Configuration Manual Miniature Circuit Breakers
(https://support.industry.siemens.com/cs/ww/en/view/45302792)
Configuration Manual Residual Protective Devices /Arc Fault Detection Devices (AFDDs)
(https://support.industry.siemens.com/cs/ww/en/view/45303255)
Configuration Manual Fuse Systems
(https://support.industry.siemens.com/cs/ww/en/view/45314810)
4.2
Device installation
4.2.1
Install the 7KN POWERCENTER 1000
To install, simply snap the 7KN Powercenter 1000 data transceiver onto the DIN rail and snap
it into place.
26
Circuit protection devices with communication and metering function
System Manual, 06/2021, L1V30827018B-01