FusionModule500 Smart Mini Data Center
User Manual
6.
7.
8.
Step 3 Configure a video recording plan.
1.
2.
3.
4.
5.
----End
5.3.12 Linkage Control
Prerequisites
●
●
●
Issue 02 (2020-12-25)
NO TE
If there are multiple IVS1800s for multiple smart modules, you are advised to evenly
distribute the cameras to each IVS1800.
Select the cameras to be added and click Next.
Click Finish.
Preview live video. On the iClient home page, click Live and drag a camera to
the live video pane. If the live video can be properly played, the camera is
successfully connected.
Choose System Management > Device Management > Micro Edge on the
iClient home page.
Right-click an IVS1800 and choose Storage Management.
Click the Server Recording tab. The tab page for configuring a server-based
recording plan is displayed.
Configure a video recording plan.
NO TE
If you set the recording plan policy to All, you do not need to set the recording plan time.
Click Save.
You have obtained the IP address of the ECC800-Pro as well as the user name
and password used for WebUI login.
You have prepared a PC with an IP address in the same network segment as
that of the ECC800-Pro, and the PC is connected to the WAN_1 port on the
ECC800-Pro.
Ensure that Enable linkage control function is Yes.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
212