Huawei FusionModule500 User Manual page 221

FusionModule500 Smart Mini Data Center
User Manual
1.
2.
3.
4.
5.
Issue 02 (2020-12-25)
On the home page of the iClient, choose System Management > Device
Management > Device Management > Micro Edge.
Right-click an IVS1800 and choose Camera Access.
Select Auto Batch Access and click Start.
Set the IP address segment.
Figure 5-48 Setting an IP network segment
NO TE
– The driver protocol of IPC6325 and C3220 cameras is HWSDK.
– The IP address segment indicates the start and end IP addresses of cameras.
You can use IP Address and Vendor to filter the required cameras in the
camera search result and select the required cameras. Alternatively, you can
directly select the required cameras in the camera list. Then verify accounts.
The default password of the HWSDK protocol is HuaWei123.
Figure 5-49 Verifying accounts
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
211