Motorola MVME2401-1 Installation And Use Manual page 106

Modifying the Environment
6
6-4
Remote Start Method Switch [G/M/B/N] = B?
The Remote Start Method Switch is used when the MVME2400 is
cross-loaded from another VME-based CPU, to start execution of the
cross-loaded program.
G
M
B
N
Probe System for Supported I/O Controllers [Y/N] = Y?
Y
N
Auto-Initialize of NVRAM Header Enable [Y/N] = Y?
Y
N
Use the Global Control and Status Register to pass
and start execution of the cross-loaded program. This
selection is not applicable to the MVME2400 boards.
Use the Multiprocessor Control Register (MPCR) in
shared RAM to pass and start execution of the cross-
loaded program.
Use both the GCSR and the MPCR methods to pass
and start execution of the cross-loaded program.
(Default)
Do not use any Remote Start Method.
Accesses will be made to the appropriate system
buses (e.g., VMEbus, local MPU bus) to determine
the presence of supported controllers. (Default)
Accesses will not be made to the VMEbus to
determine the presence of supported controllers.
NVRAM (PReP partition) header space will be
initialized automatically during board initialization,
but only if the PReP partition fails a sanity check.
(Default)
NVRAM header space will not be initialized
automatically during board initialization.
Computer Group Literature Center Web Site