Water Intake Fault - Miele PFD 101 Operating Instructions Manual

Water intake fault

Problem
The warning buzzer is
sounding.
One of the following
messages appears in
the display:

Turn on tap

Water intake

Fault F18
Possible cause and remedy
The tap is turned off.
 Turn on the tap fully.
Before rectifying the problem, you must:
 Switch the dishwasher off.
Water intake is restricted.
 Turn on the tap fully and start the programme
again.
 Clean the filter in the water inlet (see "Cleaning
and care – Cleaning the water inlet filter").
 The water connection pressure is lower than
50 kPa.
Seek professional advice.
 The on-site connection for the water drainage may
be too low and you will need to raise the water
drainage height (see "Installation – Hose position").
A technical fault has occurred.
 Switch the dishwasher off.
 Turn off the tap.
 Call Miele.
Problem solving guide
83