Warning And Safety Instructions - Miele PFD 101 Operating Instructions Manual

Correct installation

Do not install this dishwasher in an area where there is a risk of
explosion or freezing conditions.

Be careful when installing the dishwasher. Wear protective
gloves to avoid injury on any sharp metal components.

To ensure the stability of built-under dishwashers, they must only
be installed beneath a continuous worktop that is bolted to the
adjacent cabinetry.

In order to reduce the risk of damage from condensation, the
furniture in the area around the dishwasher should be designed for
commercial use.
Delicate furniture can be protected by installing the steam protection
kit optional accessory. The vapour barrier film needs to be adhered
to the underside of the worktop where the dishwasher door is
opened.

The door springs must be evenly adjusted on both sides. They are
correctly adjusted when the door remains stationary when left half
open (approx. 45° opening angle). The door must not fall open on its
own beyond this point.
The appliance must only be operated with properly adjusted door
springs.
If the door cannot be adjusted properly, contact Miele.
The maximum weight of the front panel that can be aligned with the
factory fitted door springs is 10–12 kg (depending on model).

Warning and Safety instructions

11