Cleaning The Spray Arms - Miele PFD 101 Operating Instructions Manual

Cleaning the spray arms

Particles of food can get stuck in the
spray arm jets and bearings. The spray
arms should therefore be inspected
regularly (approx. every 2–4 months).

Damage due to soiling entering
the circulation system.
Without filters, soiling can enter the
circulation system and cause a
blockage.
Do not run a wash programme
without the lower spray arm or
without the filters fitted.
When cleaning the filters and spray
arms, make sure that coarse soiling
cannot get into the circulation
system.
 Switch the dishwasher off.
Removing the upper and middle
spray arms
 Take out the 3D MultiFlex tray (if
present).
 Push the upper spray arm upwards to
engage the inner ratchet. Then
unscrew the spray arm by rotating the
screw thread anti-clockwise
(overhead perspective).
Cleaning and care
 Rotate the screw thread of the middle
spray arm clockwise (overhead
perspective)  (see diagram) and
remove the spray arm .
Removing the lower spray arm
 Remove the lower basket.
 Rotate the screw thread of the lower
spray arm anti-clockwise  and pull
the spray arm upwards to remove .
73