Display Of Programme Duration; Starting A Programme - Miele PFD 101 Operating Instructions Manual

Operation

Display of programme duration

The estimated duration of the selected
programme appears in the display
before the programme starts. During
the programme, the time left until the
end of the programme is displayed.
Symbols appear to indicate which stage
the programme is at:

Pre-wash / Soak

Main wash

Interim rinse

Final rinse

Drying

Finish
The displayed duration may vary for the
same programme. It is influenced by,
for example, the temperature of the
incoming water, the reactivation cycle
of the water softener, the amount of
crockery and how soiled it is.
When a programme is selected for the
first time, the display will show the
average programme duration for a
warm water connection.
The programme durations shown in the
"Programme chart" refer to standard
test loads and temperatures.
Each time a programme is run, the
control module calculates the
programme duration depending on the
temperature of the water taken into the
dishwasher and the size of the load.
56

Starting a programme

 Touch the Start sensor.
Confirm the previously displayed
message with OK.
The programme will start.
The Start sensor will light up
continuously.
During a programme, you can display
the programme name of the current
programme by pressing OK.

Risk of scalding due to hot
water.
During operation, water in the
dishwasher may be very hot.
Only open the door if absolutely
necessary and exercise extreme
caution when doing so.