Interrupting A Programme; Cancelling Or Changing A Programme - Miele PFD 101 Operating Instructions Manual

Commercial dishwasher
Hide thumbs Also See for PFD 101:
Table of Contents

Advertisement

Interrupting a programme

A programme will be interrupted as
soon as the door is opened.
When you close the door again, the
query
Continue with Start
display.
By pressing the Start sensor, the
programme will continue from the point
at which it was interrupted.
Risk of scalding due to hot
water.
During operation, water in the
dishwasher may be very hot.
Only open the door if absolutely
necessary and exercise extreme
caution when doing so.
appears in the
Cancelling or changing a
programme
If a programme is cancelled,
important programme stages may be
missed.
A programme should only be
cancelled in the first few minutes of
the programme sequence.
If a programme has already started and
you wish to cancel it, proceed as
follows:
 Switch the dishwasher off with the
 sensor.
 Confirm the query
with OK.
If you would like to select another
programme:
 Switch the dishwasher back on using
the  sensor.
 If you have dispensed detergent
manually, check whether the
detergent compartment is still closed.
If the lid is already open, fill it with
detergent again and close the lid.
 Select the programme you want and
start it.
Operation
Switch appliance off
59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pfd 101iPfd 103 sci

Table of Contents