Table of Contents
Advertisement
ctrlX HMI DE0015, DE0021
3
Attach the adapter to the housing coupling with four M5 or M6 screws
Fig. 20: Attach the adapter to the tube coupling
4 Tighten the adapter cover with four M3 screws, see
on page
30.
5
Route the connecting cable through the fixture and fasten the device with four M5 screws.
Fig. 21: Tightening the support arm during
R911405731, Edition 03
46
35
35 x 35
Rittal CP6664.000 (4 x M5 x 20 mm)
Rittal CP6664.500 (4 x M5 x 20 mm)
46 x 46
Rittal CP6501.050 (4 x M6 x 20 mm)
BERNSTEIN 1014800001(4 x M6)
Fig. 19 "Removing the adapter cover"
standing mounting
31 / 52
Device mounting of the display
Bosch Rexroth AG
Advertisement
Table of Contents
